Home > Products > Semiconductor > Power Management > NJW4814
Power Management
NJW4814

Dual H-Bridge Driver with Boost Converter

Features
  • Boost Converter (
    Block Output Switch Voltage (40V max.)
    Switching Current (1.5A min.)
    PWM Control
    Operating Voltage Range (2.7 to 5.5V)
    Oscillation Frequency Range (380k to 1MHz)
    Soft Start Function (48ms typ.)
    Over Current Protection
    Over Voltage Protection)
  • H-Bridge Driver Block (
    Internal 2 Channel H-Bridge
    Each Channel Operates Individually
    Over Current Protection (±300mA typ.)
    Operating Voltage Range (7.0 to 35V)
    Switching Frequency (300kHz max.)
    Output Shut Down Control
    Fault Indicator Output)
  • Under Voltage Lockout
  • Built-in Thermal Shutdown
  • Standby Function
  • Package Outline (NJW4814MLE : EQFN24-LE)
General Description
The NJW4814 is a dual H-bridge driver with boost converter IC. It can boost the output voltage from Li-ion battery and/or a 5V power supply and drives a piezo device by two H- bridge drivers. 48ms of internal fixed soft start function of the boost circuit sets a limit to startup current. The dual H-bridge drivers have independent signal inputs and a fault output function, therefore the NJW4814 improves controllability from a microcomputer.The input frequency of H-bridge driver is up to 300kHz.
Package Information
Part Number Package OutlinePinsMaterial Declaration (RoHS/Halogen)Terminal FinishWeight(mg) (Reference)Reflow solderingFlow solderingIron solderingPacking ConditionMSLSolder Foot Print
NJW4814MLEdownload
EQFN24-LE
20Sn2Bi31Yes--Non dry pack1
Sample & Buy
Part NumberPackagesStatusPacking SpecificationSample  Buy   
NJW4814MLEEQFN24-LE(Active)
PageTop