Home > Semiconductor > Power Management > NJW4118T1
Power Management
NJW4118T1

±2.0A DDR Termination Regulator

Features
  • Meets DDR-SDRAM Power Supplies
  • ±2A Source and Sink Current
  • Supply Voltage (2.7 to 5.5V)
  • VREF Voltage Accuracy (VDDQx0.49 to 0.51)
  • VTT Voltage Accuracy (VREF±40mV)
  • Status at EN Low (
    VTT Output: OFF
    (Discharge)
    VREF Output: Active)
  • Correspond to external VREF source
  • Correspond to MLCC
  • Thermal Shutdown Protection
  • Power Good (PG)
  • Over Current Protection
  • Under Voltage Lock Out(UVLO)
  • VTT discharge function
  • Package (NJW4118MJE: EQFN16-JE)
General Description
The NJW4118 is a sink/source (±2A) termination regulator for DDR-SDRAM. The NJW4118 contains a high-speed operational amplifier that provides excellent transient response. The NJW4118 can configure the two patterns of VREF +VTT output or VTT standalone output by change of wiring. Even if VREF is generated outside, VTT is able to subordinate to VREF because there is VREF_IN Pin. When using at VTT standalone, it is possible to contribute to low power consumption because VREF circuit can be completely stopped. Regarding the EN function, each output becomes as the following status: VREF is Active and VTT is OFF (Discharge) at EN=Low.
Applications
  • Automotive
  • Industrial Equipment and other
Package Information
Part Number Package OutlinePinsMaterial Declaration (RoHS/Halogen)Terminal FinishWeight(mg) (Reference)Reflow solderingFlow solderingIron solderingPacking ConditionMSLSolder Foot Print
NJW4118MJEdownload
EQFN16-JE
12-Sn2Bi17Yes--Non dry pack1
Sample & Buy
Part NumberPackagesStatusPacking SpecificationSample  Buy   
NJW4118MJE-T1EQFN16-JE(Active)

Page Top