Home > Products > Semiconductor > Operational Amplifiers & Comparators > NJU7028
Operational Amplifiers & Comparators
NJU7028

13µA/ch, Rail-to-Rail Output CMOS Operational Amplifier

Features
  • (VDD=5V, VSS=0V, Ta=25°C)
  • Supply Current(All Amplifiers)(
    NJU7026 13µA typ.
    NJU7027 26µA typ.
    NJU7028 48µA typ.)
  • Supply Voltage (1.8V to 5.5V)
  • Gain Bandwidth Product (160kHz)
  • Rail-to-Rail Output(RL=100kΩ to V+/2) (50mV from rail)
  • Ground Sense
  • Common-Mode Input Voltage Range (0V to 4.1V)
  • Input Offset Voltage (4mV max.)
  • Input Offset Voltage Drift (1.5µV/°C typ.)
  • Thin and Ultra Small Package (ESON8-U1 2.0x2.0x0.4 mm)
  • RF noise Immunity
  • Unity-Gain Stable
  • Package (
    NJU7026 SOT-23-5, SC-88A
    NJU7027 MSOP8 (TVSP8) *MEET JEDEC MO-187-DA / THIN TYPE , ESON8-U1
    NJU7028 SSOP14)
General Description
The NJU7026/NJU7027/NJU7028 are single, dual and quad rail-to-rail output single supply CMOS operational amplifiers featuring low supply current. These amplifiers operates from single 1.8V to 5.5V supply or dual ±0.9V to ±2.75V supply and provide a 160kHz gain-bandwidth products while using only 13µA of supply current per channel, ideal for 2-cell battery systems and 1-cell li-ion battery systems. NJU7026/NJU7027/NJU7028 have rail-to-rail outputs that typically swing to within 50mV of the rails with 100kΩ load and the input common mode voltage range includes negative supply rail and swing to within 0.9V of the positive rail. These characteristics make them suited for low-side current sense applications. In addition to low power and rail-to-rail output, very low bias current make them to used for photodiode amplifiers, charge amplifiers, piezoelectric sensors and other applications with high source impedance. NJU7026/NJU7027/NJU7028 are high RF-immunity to reduce malfunctions caused by RF noises from mobile phones and others. The NJU7026 is available in 5-pin SC-88A and SOT-23 package. NJU7027 is available in 8-pin MSOP (TVSP): meet JEDEC MO-187-DA / thin type package and DFN which is thin and 2mm square small package. NJU7028 is available in 14-pin SSOP package.
Applications
  • Battery-powered instruments
  • Current sensor amplifiers
  • Voltage/current monitoring
  • Power line monitoring
  • Photodiode amplifiers
Design Simulation Models
pdf NJU7028 Macro Model
Package Information
Part Number Package OutlinePinsMaterial Declaration (RoHS/Halogen)Terminal FinishWeight(mg) (Reference)Reflow solderingFlow solderingIron solderingPacking ConditionMSLSolder Foot Print
NJU7028Vdownload
SSOP14
14Sn2Bi65YesYesYesNon dry pack1
Sample & Buy
Part NumberPackagesStatusPacking SpecificationSampleBuy
NJU7028VSSOP14(Active)
Related Products
Similar Products by Function
PageTop