±2.0A DDR Termination Regulator

Data Sheet


  • Meets DDR-SDRAM Power Supplies
  • ±2A Source and Sink Current
  • Supply Voltage (2.7 to 5.5V)
  • VREF Voltage Accuracy (VDDQx0.49 to 0.51)
  • VTT Voltage Accuracy (VREF±40mV)
  • Status at EN Low (
    VTT Output: OFF
    VREF Output: Active)
  • Correspond to external VREF source
  • Correspond to MLCC
  • Thermal Shutdown Protection
  • Power Good (PG)
  • Over Current Protection
  • Under Voltage Lock Out(UVLO)
  • VTT discharge function
  • Package (NJW4118MJE: EQFN16-JE)

General Description

The NJW4118 is a sink/source (±2A) termination regulator for DDR-SDRAM. The NJW4118 contains a high-speed operational amplifier that provides excellent transient response. The NJW4118 can configure the two patterns of VREF +VTT output or VTT standalone output by change of wiring. Even if VREF is generated outside, VTT is able to subordinate to VREF because there is VREF_IN Pin. When using at VTT standalone, it is possible to contribute to low power consumption because VREF circuit can be completely stopped. Regarding the EN function, each output becomes as the following status: VREF is Active and VTT is OFF (Discharge) at EN=Low.


  • Automotive
  • Industrial Equipment and other

Package Information

Part NumberPackage OutlinePLPPinsMaterial Declaration (RoHS/Halogen)Terminal FinishWeight(mg) (Reference)Reflow solderingFlow solderingIron solderingPacking ConditionMSLSolder Foot Print
NJW4118MJEEQFN16-JE-12-Sn2Bi17Yes--Non dry pack1

Sample & Buy

Part NumberPackagesStatusPacking SpecificationSampleBuy
NJW4118MJE-T1EQFN16-JE(Active)Contact UsStock Check