Home > Products > Semiconductor > Power Management > NJU7295
Power Management
NJU7295

System Reset IC with Delay Circuit

Features
  • High Precision Detection Voltage (±1.0% (Ta=25°C))
  • Detection Voltage (1.0V (default) and adjustable with external resistor)
  • Reset Output Logic (
    Reset Low output when VIN pin is detection voltage or more
    *If required reset low output when VIN pin is detection voltage or below, see the NJU7296.
  • Delay Circuit (Internal Fixed type) (Rising / Falling independent setting)
  • Ultra Low Quiescent Current (1.7µA typ.)
  • Supply Voltage Range (1.5 to 5.5V)
  • External Input Pin While inputting low signal, keep output High level
  • Adjustable Hysteresis Voltage
  • Output Type (CMOS output)
  • Package (SOT-23-6-1)
General Description
The NJU7295 is a system reset IC with built-in delay circuit that monitors the status of a power line, and outputs a reset signal to the microcomputer. The NJU7295 outputs a reset signal when exceeds the detection voltage. Therefore it is possible to control the microcomputer by detecting a rising edge of a power line. Delay times are fixed internally and those are set in each of rising and falling. It is possible to monitor multiplex power line by combination of NJU7295 because output voltage VOUT is kept High level when EXT Pin is Low level by connecting with other NJU7295. Detection voltage’s default value is 1.0V. It can be adjusted to desired voltage by the resistor divider. In addition, a hysteresis voltage can be set arbitrarily by inserting a resistor between the VIN pin and the HYS pin.
Package Information
Part Number Package OutlinePinsMaterial Declaration (RoHS/Halogen)Terminal FinishWeight(mg) (Reference)Reflow solderingFlow solderingIron solderingPacking ConditionMSLSolder Foot Print
NJU7295F1 download
SOT-23-6-1
6 Sn2Bi 15 Yes Yes Yes Non dry pack 1
Sample & Buy
Part NumberPackagesStatusPacking SpecificationSample
NJU7295F1 SOT-23-6-1 (Active)
Related Products
Similar Products by Function
PageTop